13 KiB
Development
Hurray 🥳 🎉, you are interested in writing code for ntfy! That's awesome. 😎
I tried my very best to write up detailed instructions, but if at any point in time you run into issues, don't hesitate to contact me on Discord or Matrix.
ntfy server
The ntfy server source code is available on GitHub. The codebase for the server consists of three components:
- The main server/client is written in Go (so you'll need Go). Its main entrypoint is at
main.go, and the meat you're likely interested in is
in server.go. Notably, the server uses a
SQLite library called go-sqlite3, which requires
Cgo and
CGO_ENABLED=1
to be set. Otherwise things will not work (see below). - The documentation is generated by MkDocs and Material for MkDocs,
which is written in Python. You'll need Python and MkDocs (via
pip
) only if you want to build the docs. - The web app is written in React, using MUI. It uses Create React App
to build the production build. If you want to modify the web app, you need nodejs (for
npm
) and install all the 100,000 dependencies (sigh).
All of these components are built and then baked into one binary.
Navigating the code
Code:
- main.go - Main entrypoint into the CLI, for both server and client
- cmd/ - CLI commands, such as
serve
orpublish
- server/ - The meat of the server logic
- docs/ - The MkDocs documentation, also see
mkdocs.yml
- web/ - The React application, also see
web/package.json
Build related:
- Makefile - Main entrypoint for all things related to building
- .goreleaser.yml - Describes all build outputs (for GoReleaser)
- go.mod - Go modules dependency file
- mkdocs.yml - Config file for the docs (for MkDocs)
- web/package.json - Build and dependency file for web app (for npm)
The web/
and docs/
folder are the sources for web app and documentation. During the build process,
the generated output is copied to server/site
(web app and landing page) and server/docs
(documentation).
Build requirements
- Go (required for main server)
- gcc (required main server, for SQLite cgo-based bindings)
- Make (required for convenience)
- libsqlite3/libsqlite3-dev (required for main server, for SQLite cgo-based bindings)
- GoReleaser (required for a proper main server build)
- Python (for
pip
, only to build the docs) - nodejs (for
npm
, only to build the web app)
Install dependencies
These steps assume Ubuntu. Steps may vary on different Linux distributions.
First, install Go (see official instructions):
wget https://go.dev/dl/go1.18.linux-amd64.tar.gz
rm -rf /usr/local/go && tar -C /usr/local -xzf go1.18.linux-amd64.tar.gz
export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin
go version # verifies that it worked
Install GoReleaser (see official instructions):
go install github.com/goreleaser/goreleaser@latest
goreleaser -v # verifies that it worked
Install nodejs (see official instructions):
curl -fsSL https://deb.nodesource.com/setup_17.x | sudo -E bash -
sudo apt-get install -y nodejs
npm -v # verifies that it worked
Then install a few other things required:
sudo apt install \
build-essential \
libsqlite3-dev \
gcc-arm-linux-gnueabi \
gcc-aarch64-linux-gnu \
python3-pip \
upx \
git
Check out code
Now check out via git from the GitHub repository:
=== "via HTTPS"
shell git clone https://github.com/binwiederhier/ntfy.git cd ntfy
=== "via SSH"
shell git clone git@github.com:binwiederhier/ntfy.git cd ntfy
Build all the things
Now you can finally build everything. There are tons of make
targets, so maybe just review what's there first
by typing make
:
$ make
Typical commands (more see below):
make build - Build web app, documentation and server/client (sloowwww)
make cli-linux-amd64 - Build server/client binary (amd64, no web app or docs)
make install-linux-amd64 - Install ntfy binary to /usr/bin/ntfy (amd64)
make web - Build the web app
make docs - Build the documentation
make check - Run all tests, vetting/formatting checks and linters
...
If you want to build the ntfy binary including web app and docs for all supported architectures (amd64, armv7, and arm64),
you can simply run make build
:
$ make build
...
# This builds web app, docs, and the ntfy binary (for amd64, armv7 and arm64).
# This will be SLOW (5+ minutes on my laptop on the first run). Maybe look at the other make targets?
You'll see all the outputs in the dist/
folder afterwards:
$ find dist
dist
dist/metadata.json
dist/ntfy_arm64_linux_arm64
dist/ntfy_arm64_linux_arm64/ntfy
dist/ntfy_armv7_linux_arm_7
dist/ntfy_armv7_linux_arm_7/ntfy
dist/ntfy_amd64_linux_amd64
dist/ntfy_amd64_linux_amd64/ntfy
dist/config.yaml
dist/artifacts.json
If you also want to build the Debian/RPM packages and the Docker images for all supported architectures, you can
use the make release-snapshot
target:
$ make release-snapshot
...
# This will be REALLY SLOW (sometimes 5+ minutes on my laptop)
During development, you may want to be more picky and build only certain things. Here are a few examples.
Build the ntfy binary
To build only the ntfy
binary without the web app or documentation, use the make cli-...
targets:
$ make
Build server & client (using GoReleaser, not release version):
make cli - Build server & client (all architectures)
make cli-linux-amd64 - Build server & client (Linux, amd64 only)
make cli-linux-armv6 - Build server & client (Linux, armv6 only)
make cli-linux-armv7 - Build server & client (Linux, armv7 only)
make cli-linux-arm64 - Build server & client (Linux, arm64 only)
make cli-windows-amd64 - Build client (Windows, amd64 only)
make cli-darwin-all - Build client (macOS, arm64+amd64 universal binary)
So if you're on an amd64/x86_64-based machine, you may just want to run make cli-linux-amd64
during testing. On a modern
system, this shouldn't take longer than 5-10 seconds. I often combine it with install-linux-amd64
so I can run the binary
right away:
$ make cli-linux-amd64 install-linux-amd64
$ ntfy serve
During development of the main app, you can also just use go run main.go
, as long as you run
make cli-deps-static-sites
at least once and CGO_ENABLED=1
:
$ export CGO_ENABLED=1
$ make cli-deps-static-sites
$ go run main.go serve
2022/03/18 08:43:55 Listening on :2586[http]
...
If you don't run cli-deps-static-sites
, you may see an error pattern ...: no matching files found
:
$ go run main.go serve
server/server.go:85:13: pattern docs: no matching files found
This is because we use go:embed
to embed the documentation and web app, so the Go code expects files to be
present at server/docs
and server/site
. If they are not, you'll see the above error. The cli-deps-static-sites
target creates dummy files that ensure that you'll be able to build.
While not officially supported (or released), you can build and run the server on macOS as well. Simply run
make cli-darwin-server
to build a binary, or go run main.go serve
(see above) to run it.
Build the web app
The sources for the web app live in web/
. As long as you have npm
installed (see above), building the web app
is really simple. Just type make web
and you're in business:
$ make web
...
This will build the web app using Create React App and then copy the production build to the server/site
folder, so
that when you make cli
(or make cli-linux-amd64
, ...), you will have the web app included in the ntfy
binary.
If you're developing on the web app, it's best to just cd web
and run npm start
manually. This will open your browser
at http://127.0.0.1:3000
with the web app, and as you edit the source files, they will be recompiled and the browser
will automatically refresh:
$ cd web
$ npm start
Build the docs
The sources for the docs live in docs/
. Similarly to the web app, you can simply run make docs
to build the
documentation. As long as you have mkdocs
installed (see above), this should work fine:
$ make docs
...
If you are changing the documentation, you should be running mkdocs serve
directly. This will build the documentation,
serve the files at http://127.0.0.1:8000/
, and rebuild every time you save the source files:
$ mkdocs serve
INFO - Building documentation...
INFO - Cleaning site directory
INFO - Documentation built in 5.53 seconds
INFO - [16:28:14] Serving on http://127.0.0.1:8000/
Then you can navigate to http://127.0.0.1:8000/ and whenever you change a markdown file in your text editor it'll automatically update.
Android app
The ntfy Android app source code is available on GitHub. The Android app has two flavors:
- Google Play: The
play
flavor includes Firebase (FCM) and requires a Firebase account - F-Droid: The
fdroid
flavor does not include Firebase or Google dependencies
Navigating the code
- main/ - Main Android app source code
- play/ - Google Play / Firebase specific code
- fdroid/ - F-Droid Firebase stubs
- build.gradle - Main build file
IDE/Environment
You should download Android Studio (or IntelliJ IDEA with the relevant Android plugins). Everything else will just be a pain for you. Do yourself a favor. 😀
Check out the code
First check out the repository:
=== "via HTTPS"
shell git clone https://github.com/binwiederhier/ntfy-android.git cd ntfy-android
=== "via SSH"
shell git clone git@github.com:binwiederhier/ntfy-android.git cd ntfy-android
Then either follow the steps for building with or without Firebase.
Build F-Droid flavor (no FCM)
!!! info I do build the ntfy Android app using IntelliJ IDEA (Android Studio), so I don't know if these Gradle commands will work without issues. Please give me feedback if it does/doesn't work for you.
Without Firebase, you may want to still change the default app_base_url
in values.xml
if you're self-hosting the server. Then run:
# Remove Google dependencies (FCM)
sed -i -e '/google-services/d' build.gradle
sed -i -e '/google-services/d' app/build.gradle
# To build an unsigned .apk (app/build/outputs/apk/fdroid/*.apk)
./gradlew assembleFdroidRelease
# To build a bundle .aab (app/fdroid/release/*.aab)
./gradlew bundleFdroidRelease
Build Play flavor (FCM)
!!! info I do build the ntfy Android app using IntelliJ IDEA (Android Studio), so I don't know if these Gradle commands will work without issues. Please give me feedback if it does/doesn't work for you.
To build your own version with Firebase, you must:
- Create a Firebase/FCM account
- Place your account file at
app/google-services.json
- And change
app_base_url
in values.xml - Then run:
# To build an unsigned .apk (app/build/outputs/apk/play/*.apk)
./gradlew assemblePlayRelease
# To build a bundle .aab (app/play/release/*.aab)
./gradlew bundlePlayRelease